How It Works:
Positron G.hn to Ethernet Managed Demarcation Point
“Fiber to the Home” is far from the only and most efficient technology to deliver Gigabit Internet access to subscribers. Retrofitting an existing (brownfield) Multi-Dwelling Unit (MDU) with fiber is complex and expensive. The G1001 series of “G.hn to Ethernet” Managed Demarcation Point devices complements the Positron G.hn Aggregation Multiplexer (GAM) family to deliver near symmetrical Gigabit Internet access to subscribers in MDUs over the existing telephone or coaxial infrastructure at a fraction of the cost of alternatives.
Introducing G.hn
The ITU-T G.9960 G.hn Wave-2 standard is designed to leverage the existing telephone wiring (UTP, CAT-3 or CAT-5/5e) or RG-6/RG-59 coax cabling with an access technology that delivers a Gigabit Internet service to each subscriber at a lower cost and without the complexity and delays associated with in-building fiber installation. G.hn is used as an Access technology by Operators looking to simplify their access network and backend infrastructure with an Ethernet-like technology that is highly scalable without some of the inherent complexity of DSL-related technologies. With G.hn as the Access technology, Operators deliver advanced services such as Gigabit High Speed Residential Internet and 4K IPTV without the high capital and operational expenses associated to a fiber retrofit. The Positron GAM solution is MEF CE 2.0 compliant and is ideally suited to deliver Business Ethernet services in an MDU and/or MTU deployment.
About the G1002 Series Managed Demarcation Point with POE / POE+ support
The G1002 series terminates the G.hn link under the control of the Positron GAM, making sure the information transmitted over the G.hn links is protected with strong AES-128 encryption. It offers comprehensive VLAN support as per the IEEE 802.1q standard and the VLAN mode of each port is individually con gurable: Trunk, Access or Untagged.
The G1002-C+ further add support on GigE port #1 for Power over Ethernet (POE or POE+) as per the IEEE 802.3at standard (30W) to devices such as Wi-Fi Access Points, IP Camera or Residential Gateways (RG).
Get Started on The Right Solution Now. Speak to a Positron Representative Today!
Resources
Accelerating Digital Equity Nationwide
High speed broadband access is now more than ever a fundamental need for remote learning and tele-working, video streaming, entertainment and video conferencing especially with multiple users in the same household.
GAM Solution Brief
Positron’s G.hn technology provides managed non-blocking symmetrical Gigabit bandwidth services to subscribers over existing telephone wire or coaxial cable on extended distances, at a lower cost and with reduced complexity compared with G.fast.
G.hn and CATV Coexistence – MDU Gigabit Speeds Without Compromise
For carriers seeking to expedite their broadband deployment in underserved areas, the prospect of an in-building fiber installation for high-speed broadband is a daunting challenge. Fortunately, Positron’s G.hn Access Multiplexer (GAM) technology makes it possible to leverage a non-blocking CE 2.0 Carrier Ethernet Core to reliably deliver managed Gigabit services over existing infrastructure.
Extending Gigabit Fiber services to Every Door without installing fiber to the door
Positron’s G.hn Access Multiplexer (GAM) can extend your fiber services to every door of an MDU/MTU over the existing telephone pairs or coaxial cable to deliver Gigabit broadband. The Positron GAM delivers symmetrical Gigabit broadband without the need to install fiber to every door.